(+234)-916-495-6264     |      iprojectresearchonline@gmail.com
1

1. SOLAR TECHNOLOGY: AN ALTERNATIVE SOURCE OF ENERGY FOR NATIONAL DEVELOPMENT

Background of the study: The development of a nation brings an effective transformation of its socio-political, economic, cultural, technology and industrial bases. More so, within the particular conception of socio-economic processes which underscores every econ...

Read More

2. THE DESIGN AND CONSTRUCTION OF FM RADIO TRANSMITTER

ABSTRACT: An FM transmitter is an electronic device which, with the aid of an antenna, produces radio waves. The transmitter itself generates a radio frequency alternating current, which is applied to the antenna. When excited by this alternating current, the antenna radiate...

Read More

3. AN ASSESSMENT OF THE DESIGN AND CONSTRUCTION OF 5KVA INVERTER

BACKGROUND OF THE STUDY: The unreliability of the nation's electrical power supply is a well-established truth in today's society. There is now a substantial disruption in the provision of electrical power over the whole planet. As a consequence of the disruption in...

Read More

4. ANALYTICAL DESIGN AND CONSTRUCTION OF AUTOMATIC SOLAR STREET LIGHT

INTRODUCTION: Since the discovery of electrical energy for illumination, it is evident that human interaction is required to operate the switch, either off when not in use or ONM when needed. Because of this reason, as well as a lack of electricity supply, there has been a p...

Read More

5. ASSESSMENT OF THE IMPLICATION OF FULANI HERDSMEN BANDITRY ACTIVITIES ON COMMUNITY SETTLEMENT

BACKGROUND OF THE STUDY: The Fulani unarguably represent a significant part of the economy of Nigeria. They are the major breeders of goats, sheep and cattle as those animals are the major source of meat and affordable source of animal proteins ate by Nigerians.&...

Read More

6. BRITAIN AND NIGERIA’S INDEPENDENCE IN 1960

BACKGROUND OF THE STUDY: The territory known as Nigeria was a British creation. Its coastal areas have for some three to four hundred years been involved in trade, particularly slave trade with Britain. With the abolition of slave trade and the setting up of indu...

Read More

7. CONSTRUCTION OF CAR TOUCH INTRUDER ALARM

ABSTRACT: The main objective of this project was to ensure a proper security to car being parked in garage against theft or an intruder. The circuit uses three NE555 timers; one of the NE555 was wired as a monostable oscillator and remaining two were wired as tone generator and a...

Read More

8. CONSTRUCTION OF CELLOPHANE SEALING MACHINE

ABSTRACT: The construction of the cellophane sealing machine was carried out.  The project started with an encompassing review of the various methods of heat sealing film packages.  The machine can be used in sealing both low, medium an...

Read More

9. DESIGN AND CONSTRUCTION OF 5KVA POWER INVERTER

BACKGROUND OF THE STUDY: It is a well known fact today that electrical power supply is not reliable. All over the world, there is a significant electrical power supply interruption. Because of these electrical power supply interruption, many electrical  instruments have...

Read More

10. DESIGN AND CONSTRUCTION OF A METRE BRIDGE

BACKGROUND HISTORY OF WHEATSTONE BRIDGE: The study of electricity is an important aspect of physics because electricity plays a key role in the modern world.  The working of most modern appliances such as radio, television, computers and calculators, refrige...

Read More

11. DESIGN AND CONSTRUCTION OF AN AUTOMATIC PHASE SELECTOR

ABSTRACT: This is a technical report presented on the design and construction of an Automatic Phase Selector. In the construction work, an ordinary level knowledge of electronics principles are observed. We aimed at presenting a practical aspect of the subject and then providing...

Read More

12. DESIGN AND CONSTRUCTION OF AN AUTOMATIC VOLTAGE STABILIZER

ABSTRACT: In the world today, the use of power supply in electronics equipment and gadgets has increased and it is still increasing.  These power supplies are not stable as required by these electronics. This arise the need for the power stabilization as to overcome thi...

Read More

13. DESIGN AND CONSTRUCTION OF AUTOMATIC QUICK BUZZER SYSTEM

BACKGROUND OF THE STUDY: Quiz buzzers are used often at places like educational institutions where it is required for game shows and also in live quiz competitions broadcasted via television. A quiz buzzer allows any user to press the switch quickly in response to a question pose...

Read More

14. DESIGNING AND CONSTRUCTING AN AUTOMATIC SOLAR STREET LIGHT

INTRODUCTION: Since the discovery of electrical energy for illumination, it is evident that human interaction is required to operate the switch, either off when not in use or ONM when needed. Because of this reason, as well as a lack of electricity supply, there has been a p...

Read More

15. CONSTRUCTION OF 1KVA INVERTER USING SOLAR PANEL

INTRODUCTION: Every hour the sun beans on to earth more than enough energy to satisfy global needs. A solar energy is the technology used to harmless the scene’s energy and makes it usable, a solar inverter here in converting the direct current (D.C) into alternating c...

Read More

16. THE IMPACT OF VIOLENT CONFLICT IN THE PROCESS OF DEMOCRATIZATION

CHAPTER ONE

INTRODUCTION

Background of the Study: In social science no concept has a single definition, because there are converging views of concepts that is, different schol...

Read More

17. THE IMPLICATION OF FULANI HERDSMEN BANDITRY ACTIVITIES ON COMMUNITY SETTLEMENT

CHAPTER ONE

INTRODUCTION

BACKGROUND OF THE STUDY: The Fulani unarguably represent a significant part of the economy of Nigeria. They are the major breeders of goats, sheep and...

Read More

18. THE IMPACT OF ELECTRICITY SUPPLY ON ECONOMIC GROWTH 2002-2023

CHAPTER ONE

INTRODUCTION

Background to the Study: Since the dawn of time, man as an individual and in groups have gone in search of power. Power to change things and power to...

Read More

19. DESIGN AND IMPLEMENTATION OF DSP-BASED THREE-LEVEL SIMPLIFIED SPWM MODULATION METHOD

Abstract: The traditional three-level sinusoidal pulse width modulation (SPWM) requires two carriers to be compared with the modulating waveform to get the duty cycle, which can not be realized in a single-core DSP chip with high requirements. This paper proposes...

Read More

20. DESIGN AND IMPLEMENT AN ARTIFICIAL INTELLIGENCE DIETITIAN WITH PYTHON

CHAPTER ONE

INTRODUCTION

Overview

Recent estimates suggest that poor dietary habits are linked to one in five early deaths globally (Afshin et al., 2019). Tackling t...

Read More

21. A CUCKOO SEARCH BASED CO-ORDINATION OF DISTRIBUTED GENERATION UNITS AND SHUNT CAPACITOR BANK IN RADIAL DISTRIBUTION NETWORKS

ABSTRACT

This research work presents the Application of Cuckoo Search Algorithm for the simultaneous placement of distributed generation units and shunt capacitor banks in radial distribution networks. The approaches used in most literatures for determining the optimal allocation of DG...

Read More

22. A FAST QUASI-STATIC TIME SERIES SIMULATION METHOD USING SENSITIVITY ANALYSIS TO EVALUATE DISTRIBUTED PV IMPACTS

SUMMARY

The desire to reduce carbon footprint coupled with government incentives has led to a massive deployment of renewable energy resources, solar photovoltaics (PV) in particular. Electric utilities in the United States face the challenge of numerous solar PV interconnec- tion reque...

Read More

23. ANTICONVULSANT STUDIES OF THREE SYNTHESIZED DICHLORO- SUBSTITUTED PHENYL PROPANAMIDES AND THEIR ACTION ON VOLTAGE-GATED SODIUM CHANNELS (Nav1.6)

Abstract

The field of antiepileptic drug development has become dynamic, affording many promising research opportunities. Continued efforts are being made in the development of antiepileptic drugs employing a range of strategies, including modification of the structures of existing drug...

Read More

24. APPLICATION OF AN OPTIMAL TUNING TECHNIQUE OF ON-LOAD TAP- CHANGING TRANSFORMER FOR POWER QUALITY IMPROVEMENT IN TRANSMISSION LINE NETWORK

ABSTRACT

For reliable and efficient operation of power system, voltage level and reactive power flow along transmission lines has to be adequately regulated. To control reactive power flow over transmission lines and compensate for varying voltage drops, tap changing transformers are re...

Read More

25. APPLICATION OF BAT ALGORITHM-BASED METHOD FOR MULTI-OBJECTIVE OPTIMAL NETWORK RECONFIGURATION AND DISTRIBUTED GENERATION PLACEMENT IN RADIAL DISTRIBUTION NETWORK

ABSTRACT

This dissertation presents an Application of Bat Algorithm-Based Method (BA) forMulti- Objective Optimal Network Reconfiguration andDistributed Generation placement in Radial Distribution Network. The BA approach presented in this work enables the reconfiguration of the network...

Read More

26. BACTERIAL FORAGING ALGORITHM BASED TUNING OF ON-LOAD TAP CHANGING TRANSFORMER FOR VOLTAGE REGULATION IN POWER TRANSMISSION NETWORK

ABSTRACT

The control of voltage level has been identified as one of the most important operational needs for efficient and reliable operation of power system equipment. Due to the fact that both the utility and customer equipment are designed to operate at certain voltage ratings. Prolo...

Read More

27. CONSTRUCTION OF A GSM BASED HOME AUTOMATION USING AVR

ABSTRACT

With advancement of technology things are becoming simpler and easier for us. Automatic systems are being preferred over manual system. The purpose of this project is to design and construct A GSM based home automation using AVR. Using GSM networks, in this project a home power...

Read More

28. CONSTRUCTION OF A MICROCONTROLLER BASED SECURITY DOOR USING SMART CARD

ABSTRACT

This project shows the construction of a microcontroller based security door using smart card. It is aimed towards programming the microcontroller to control the hardware in sliding door. The system consists of a microcontroller 89S52 which sends a signal to the multiplexers on...

Read More

29. CONSTRUCTION OF A MICROCONTROLLER BASED T-JUNCTION TRAFFIC LIGHT CONTROLLER

ABSTRACT

T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the pedestrians a right of...

Read More

30. CONSTRUCTION OF A MICROCONTROLLER BASED GATE

ABSTRACT

Microcontroller based automate controller is a project design of a system that is used in operating a gate automatically. The system opens the gate automatically when a human being or car is about to enter a compound or exit a compound. The system works by sensing the light ray...

Read More

31. CONSTRUCTION OF AUTOMATIC WATER LEVEL CONTROLLER FOR BOTH OVERHEAD AND UNDERGROUND TANKS

ABSTRACT

Automatic water level controller for both overhead and underground tank is designed to monitor the level of water in a tank. It displays the level of water and when it is at the lowest level; a pump is activated automatically to refill the tank. When the tank is filled to its m...

Read More

32. CONSTRUCTION OF MICROCONTROLLER BASED VEHICLE SPEED ALARM.

ABSTRACT

The project is based on Construction of microcontroller vehicle speed alarm system which automatically warns the driver by activating a panic alarm which is triggered on when the driver exceeds the speed limit set in the system which also stops the alarm when the speed is reduc...

Read More

33. DESIGN AND CONTRUCTION OF AUTOMATIC PHASE SELECTION

INTRODUCTION

As the growing population of human race widens the gulf between energy supply and energy demand, the imbalance in energy availability sent researchers into excavating for a way of settling this age long squabble. A lasting solution is vested on alternative use of the renewa...

Read More

34. DESIGN AND IMPLEMENTATION OF LIGHTING SWITCHING CONTROL SYSTEM (INTERFACE)

1.1BACKGROUND OF THE STUDY

Traditionally, high control in home and office environments takes place through switches (on/off), deals and sliders (dimmers) and sometimes motion sensors. These controls can be incorporated in the built environment such as walls, or attached to lights that p...

Read More

35. DETERMINATION OF YEARLY PERFORMANCEAND DEGRADATION RATE OF ELECTRICAL PARAMETERS OF A MONOCRYSTALLINE PV MODULE IN MINNA, CENTRAL NIGERIA

ABSTRACT

There is a need for accurate knowledge of the performance, degradation rate, and lifespan of the photovoltaic (PV) module in every location for an effective solar PV power system. Outdoor degradation analysis was carried out on a mono-crystalline PV module rated 10 W using the...

Read More

36. DETERMINATION OF YEARLY PERFORMANCE AND DEGRADATION RATE OF ELECTRICAL PARAMETERS OF AMORPHOUS SILICON PHOTOVOLTAIC MODULE IN MINNA, NIGERIA

ABSTRACT

There is need for accurate knowledge of performance, degradation rate and lifespan of photovoltaic (PV) module in every location for an effective solar PV power system. Outdoor degradation analysis was carried out on amorphous silicon PV module rated 10 W using CR1000 software-...

Read More

37. DEVELOPMENT OF A 5KG CAPACITY INDUCTION FURNACE FOR MELTING ALUMINIUM

 

ABSTRACT

Aluminium in Nigeria is a popular metallic element. Widely used to produce single domestic appliances and even industrial engine components. These components display a decrease in performance level after many years of service are discarded and they become waste...

Read More

38. DEVELOPMENT OF A SENSITIVITY INDEX BASED TECHNIQUE FOR UNIFIED POWER FLOW CONTROLLER PLACEMENT WITH CONTINGENCY ANALYSIS ON NIGERIA 330kV TRANSMISSION NETWORK

ABSTRACT

Power system network is designed to operate in a prescribed voltage and frequency for stability and for better power quality. Unexpected contingencies leads to instability related problems in the system. This research develops a sensitivity index based technique with contingenc...

Read More

39. DEVELOPMENT OF A SHUNT ACTIVE POWER FILTER FOR HARMONIC REDUCTION USING SYNCHRONOUS REFERENCE FRAME WITH SPACE VECTOR PULSE WIDTH MODULATION

ABSTRACT

This work aimed at designing and implementation of Shunt Active Power Filter (SAPF) for power quality improvement through harmonic reduction. The current harmonics are being caused by nonlinear characteristic of power electronics based equipments which increase power losses and...

Read More

40. DEVELOPMENT OF A STATE ESTIMATION BASED IMPROVED DETECTION AND LOCALIZATION OF NON-TECHNICAL LOSSES USING SMART METER MEASUREMENTS

ABSTRACT

This research work presents the development of branch current based state estimation for Non- Technical Losses (NTLs) Detection and Localization. The use of weighted least square (WLS) state estimation for the evaluation of branch current of a network during theft is considered...

Read More

41. DEVELOPMENT OF AN IMPROVED FORCED ISLAND AND LOAD SHEDDING SCHEME TO PREVENT SYSTEM COLLAPSE

ABSTRACT

This research work presents a scheme that identifies line outage and generator outage using contigency analysis and effectively splits the network into a set of predefined islands, with a load shedding strategy to minimise the adverse effect of each outage and to ensure system...

Read More

42. DEVELOPMENT OF FIREFLY ALGORITHM BASED METHOD FOR DISTRIBUTED GENERATION PLANNING IN AN UNBALANCED THREE-PHASE DISTRIBUTION NETWORK USING VOLTAGE STABILITY INDEX

ABSTRACT

This research work presents development of Firefly algorithm (FA) and application of voltage stability index (VSI) for optimal planning of Distribution Generation (DG) in an unbalanced three- phase distribution network. The VSI was used to find the DG location while the FA was...

Read More

43. HARMONICS MITIGATION ON VARIABLE FREQUENCY DRIVE USING SINGLE PHASE SHUNT ACTIVE POWER FILTER CONTROLLED BY ARTIFICIAL NEURAL NETWORK A CASE STUDY OF KILN UNIT OF DANGOTE CEMENT PLANT OBAJANA

ABSTRACT

This research presents effect of harmonic generated by variable frequency drives (VFD).In the past, electrical power system equipment and devices were designed to produce nearly sinusoidal voltage and current waveforms. However, nowadays, with much interest and wide spreads of...

Read More

44. RENEWABLE ENERGY MONITORING AND HARVESTING USING IOT (SOLAR ENERGY)

CHAPTER ONE

INTRODUCTION

1.1 Background of the Study

The global energy crisis and the need for su...

Read More